Doorking 1601 Barrier Gate Operator with Convenience Open DC (order arm and hardware kit separately) 1601-081

Doorking 1601 Barrier Gate Operator with Convenience Open DC (order arm and hardware kit separately) 1601-081

Call for price

ACCESSORIES & RELATED MODELS

Doorking 1601 Aluminum Arm Hardware Kit for 1601, 1603 Barrier Gate Operator 1601-242

Doorking 1601 Aluminum Arm Hardware Kit for 1601, 1603 Barrier Gate Operator 1601-242

Doorking 1601-242 Aluminum Arm Hardware Kit for 1601 1603 Barrier Gate Operator. To be used with 1601-516 Aluminum Arm 14-ft – non-lighted..

Doorking 1200 Three Button Interior Controller Open,Close and Stop. 1200-070

Doorking 1200 Three Button Interior Controller Open,Close and Stop. 1200-070

Gate operator control stations provide complete manual control for DKS vehicular gate operators. The unique logic inputs found on DKS gate operators require only 3 wires for connection to a 3‐button control station. Manual control devices for DKS vehicular gate operators Interior and exterior..

Doorking 2600 High Voltage Kit. Required to upgrade Voltage from 115vac 2600-266

Doorking 2600 High Voltage Kit. Required to upgrade Voltage from 115vac 2600-266

Allows the operator to be powered from 208,230,460 or 575 source-voltage. In dual gate applications, only one (1) kit is required (secondary operator DOES NOT require a high voltage kit)...

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Doorking 9409 Plug-in 2 channel Loop Detector 9409-010

Doorking 9409 Plug-in 2 channel Loop Detector 9409-010

Click on the "Related Products" Tab Above for More Models Loop detectors and loops are strongly recommended on all automated vehicular gate applications to help prevent gates from closing on vehicles in the path of the gate. DKS Single & Two-Channel Loop Detectors Model 9410-010 DKS Single Channel Loop Detector Model 9409-010 DKS Two Channel Loop Detector Plug‐in detector ‐ use with DKS gate operators only Reno A&E Loop Detectors Model 9402‐045 Reno A..

Doorking 1601 Aluminum Gate Arm 14ft  for 1601 Barrier Gate 1601-516

Doorking 1601 Aluminum Gate Arm 14ft for 1601 Barrier Gate 1601-516

Doorking 1601-516 Aluminum Arm 14ft  for 1601 Barrier Gate...

Click on the "Related Products" Tab Above for More Models

The 1601 operator is designed for single lane (14 ft. max) vehicular traffic control in high traffic commercial and industrial applications.   The 1601 operator is designed so that it can be mounted on either the left or right hand side of the roadway.   The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.
Available w/ High Voltage Kit for Source Voltages over 115V
Convenience Open Option

BEAM AND MOUNTING KIT ORDERED SEPARATELY

  *Automatic P.A.M.S. sequencing with slide and swing gates
  * Folding arm kits available for low headroom applications
   *Barrier arms available in aluminum or plastic with optional foam padding
Features: 

  • Magnetic limit control.
  • Ports for plug-in loop detectors.
  • Automatic sequencing inputs for use with slide and swing gate operators.
  • Up input memory buffer.
  • Down memory option.
  • Multiple up commands.
  • Two convenience outlets.
  • 360° gear box rotation.
  • Gate tracker reporting output.
  • Programming switches.
  • Built-in power On/Off switch.
  • Left or right hand mount.
  • Plastic or aluminum barrier arm (not included, order separately).
  • Barrier arm hardware kit (not included, order separately).
  • Manual Crank kit available (1601-270).

Specifications: 

1/2 HP continuous-duty motor.

115, 230*, 460* VAC.   (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)

40:1 gear-box running in a continuous oil bath.

Arm rotates 90° in approximately 1.5 seconds.

Class II, III and IV applications.

Compliant with UL 325 and 991.  ETL Listed.  (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.  Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)

Dimensions (operator only): 15.25"W x 39.5"H x 14.75"D. 

The 1601 operator is designed for single lane (14 ft. max) vehicular traffic control in high traffic commercial and industrial applications.   The 1601 operator is designed so that it can be mounted on either the left or right hand side of the roadway.   The operator can be equipped with a DC convenience open package (optional) that will automatically raise the arm in the event of a power outage.

  *Automatic P.A.M.S. sequencing with slide and swing gates
  * Folding arm kits available for low headroom applications
   *Barrier arms available in aluminum or plastic with optional foam padding
Features: 

  • Magnetic limit control.
  • Ports for plug-in loop detectors.
  • Automatic sequencing inputs for use with slide and swing gate operators.
  • Up input memory buffer.
  • Down memory option.
  • Multiple up commands.
  • Two convenience outlets.
  • 360° gear box rotation.
  • Gate tracker reporting output.
  • Programming switches.
  • Built-in power On/Off switch.
  • Left or right hand mount.
  • Plastic or aluminum barrier arm (not included, order separately).
  • Barrier arm hardware kit (not included, order separately).
  • Manual Crank kit available (1601-270).

Specifications: 

1/2 HP continuous-duty motor.

115, 230*, 460* VAC.   (*230 and 460 volt units use a step-down power transformer to achieve 115 volt operating voltage.)

40:1 gear-box running in a continuous oil bath.

Arm rotates 90° in approximately 1.5 seconds.

Class II, III and IV applications.

Compliant with UL 325 and 991.  ETL Listed.  (Note: To be compliant with UL 325 and industry safety guidelines, additional secondary entrapment prevention devices may need to be installed with this gate operator.  Your professional DKS system installer can provide you with more details on these devices and on current industry safety standards.)

Dimensions (operator only): 15.25"W x 39.5"H x 14.75"D.
 

Options:
DC powered convenience open.
14-foot round aluminum arm.
12-foot plastic arm.
Plastic arm folding bracket for low headroom.
Foam padding for aluminum arm.
Options:
DC powered convenience open.
14-foot round aluminum arm.
12-foot plastic arm.
Plastic arm folding bracket for low headroom.                                                                    



.

 

 

 

 

 

 

Memory
test 1 test

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Doorking 1601 Aluminum Arm Hardware Kit for 1601, 1603 Barrier Gate Operator 1601-242

Doorking 1601 Aluminum Arm Hardware Kit for 1601, 1603 Barrier Gate Operator 1601-242

Doorking 1601-242 Aluminum Arm Hardware Kit for 1601 1603 Barrier Gate Operator. To be used with 1601-516 Aluminum Arm 14-ft – non-lighted..

Doorking 1200 Three Button Interior Controller Open,Close and Stop. 1200-070

Doorking 1200 Three Button Interior Controller Open,Close and Stop. 1200-070

Gate operator control stations provide complete manual control for DKS vehicular gate operators. The unique logic inputs found on DKS gate operators require only 3 wires for connection to a 3‐button control station. Manual control devices for DKS vehicular gate operators Interior and exterior..

Doorking 2600 High Voltage Kit. Required to upgrade Voltage from 115vac 2600-266

Doorking 2600 High Voltage Kit. Required to upgrade Voltage from 115vac 2600-266

Allows the operator to be powered from 208,230,460 or 575 source-voltage. In dual gate applications, only one (1) kit is required (secondary operator DOES NOT require a high voltage kit)...

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Doorking 9409 Plug-in 2 channel Loop Detector 9409-010

Doorking 9409 Plug-in 2 channel Loop Detector 9409-010

Click on the "Related Products" Tab Above for More Models Loop detectors and loops are strongly recommended on all automated vehicular gate applications to help prevent gates from closing on vehicles in the path of the gate. DKS Single & Two-Channel Loop Detectors Model 9410-010 DKS Single Channel Loop Detector Model 9409-010 DKS Two Channel Loop Detector Plug‐in detector ‐ use with DKS gate operators only Reno A&E Loop Detectors Model 9402‐045 Reno A..

Doorking 1601 Aluminum Gate Arm 14ft  for 1601 Barrier Gate 1601-516

Doorking 1601 Aluminum Gate Arm 14ft for 1601 Barrier Gate 1601-516

Doorking 1601-516 Aluminum Arm 14ft  for 1601 Barrier Gate...

File Name Size Link
Doorking 1601 & 1602 Install Manual 7.11Mb download
Doorking 1601 Spec Brochure Spanish 0.21Mb download
Doorking 1601 Spec Brochure 0.50Mb download
Doorking 1602 Spec Brochure Spanish 0.21Mb download