Doorking 1000 Power Inverter 1000 Watt - AC out 120V. 1000-080
Call for price
Click on the "Related Products" Tab Above for More Models
The model 1000 Power Inverter is designed to provide backup AC power for the entire vehicular access control system when primary (AC) power fails. Unlike some backup systems which simply provide DC power for the gate operator itself, these inverters provide 120 Volt AC power to all components (gate operator, access control system, loop detectors, reversing devices, emergency vehicle access devices, etc.) of the access control system. The model 1000 is designed to provide power for two (2) gate operators and related access control system accessories.
*Includes one (1) battery and will power one (1) 1/2 HP Operator for Doorking Operators Only(you may add up to 1 more battery.)
Features:
- Selectable power out and power start options.
- Selectable continuous operation mode or quick open mode.
- Modified sine-wave or pure sine-wave output models are available.
- Electronic control circuit monitors battery voltage while system is in inverter mode and commands gate operators to open when battery power reaches critical levels.
Specifications:
- AC Output Voltage is 120 VAC, 60 Hz with ±10% regulation
- Continuous Power Output is 1000 Watts
- 1000 has a Modified Sine-Wave output and can power a single 1/2 HP gate operator system. Since this is a Modified Sine-Wave, this model should only be used with DKS gate operators as they have been designed to work within the limits of the Inverter's modifed sine-wave.
- 1000-2 has a Pure Sine-Wave output and can power two 1/2 HP gate operator systems or a single 1 HP system.
- DC Input voltage is 10-15 VDC
- Operating temperature 32°F (O°C) to 126°F (52°C)
- Low battery alarm, low battery shutdown
- Overload protection and Input short protection
- Model 1000 uses 1 or 2 Maintenance Free, Rechargeable, Non-spillable, Sealed Lead-Acid (SLA), 12-Volt, 35 AH.
Model 1000
Options:
Modified Sine-Wave: 9 Amp maximum load.
Pure Sine-Wave: 12 Amp maximum load.
Use the Modified Sine-Wave model only with DKS gate operators. Use the Pure Sine-Wave model with all others.
IMPORTANT! The model 1000 can only be used with products that use a PSC (Permanent Split Capacitor) motor. Do Not use the model 1000 on products that ultilize a motor with start windings as the start-up amerage draw on this type of motor exceeds the maxim