Click on Related Products Tab for more products
FAAC S450H 24VDC Hydraulic Operator for residential/condominium and commercial swing-leaf gates with single-leaf maximum length of 14ft and single-leaf weight of 1,100lbs. Battery backup built in, and first set of batteries provided. A convenient manual release is standard on all models. Available for single swing gates or dual swing gates. Internal positive stops are are built in. Very accurate anti-crushing and reverse obstacles functions, and highly accurate position awareness, due to an integrated encoder. Gate speed and force are adjustable.
This kit includes:
1 FAAC S450 Swing Gate Operator - Max leaf weight 1000lbs
1 FAA-3353.1 Solar Kit (Includes : 1 - 16"X14' Fiberglass enclosure, 1 - Backplate w/ Solar Charge & Switch, 1 - E024U Board 1 - Cable & 1 - 30W Panel)
1 FAA-787741 433Mhz Plug in Receiver
2 FAA-787453 4CH 433Mhz Transmitters
2 FAS MA004 Batteries
Features
Multi-position adjustable bracket
High opening speed, and adjustable
Integrated Encoder for accurate positioning and control
Manual release
Integrated opening/closing mechanical stops built in
UL991 safety standard compliant
Powerful and efficient Switching Power Supply
Easy programming with trimmers and dip switches
One pushbutton automatic self learning
Self resetting fuses
StandBy mode for efficient power use
Built in battery backup
Features/Single Arm Full Kit
One hydraulic gate operators
Mounting hardware
One EO24U455 D control panel
Back up Batteries
One 14 x 16 in. weather resistant UL Listed fiberglass enclosure
One or two manual release keys
FAAC Wireless Radio Receiver with 2 Transmitters. XT4 433mhz
115 VAC receptacle for accessories (5 amp max.)
ON/OFF switch controlling power to control panel, accessories and plug outlet
Large pre-wired terminals for easy wiring to control panel
Test button
Two warning signs
UL325 compliant
Electric limit switches.
The Model AK-21W Exterior Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics.
Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp..
Two-Button Switch
Features:
.Switch rating: 250 VAC; 10 amps
.Indoor or outdoor use
.Painted aluminum
.Surface mounted
.Open buatton is N.O. (Normally Opened)
.Close button is N.O. (Normally Opened)
For use with B, C, and P FAAC control panel logics:
B = 3 momentary switches: open, close and stop
C = 2 continuous pressure switches: open and close;
P = 3 momentary switches: open, close.
Dimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep
(10.2 cm x 7.3 cm..
Application: 1/4" wide saw cuts, gated facilities
The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
Details
Repalces FAAC 2667 and 2665 Loop Detectors
11 Pin Plug in base. Automatic calibration when switching or setting, a USB interface for use with modern diagnostic and service.
The same features as the those it replaces.
..
Internet IP programmable via any browser on the market including iPad, Smartphone and Tablet
Programmable via Local Area Network (LAN), INTERNET or Direct Ethernet Connection via any browser
SELECTABLE PORT, NO DEDICATED STATIC IP NEEDED
“NO SOFTWARE INSTALLATION” on a computer is necessary
100 Tenants Capacity
1x16 Liquid Crystal Display (LCD)
Built-in 26 Bit Proprietary Wiegand Reader
26-Bit Wiegand Input, HID Reader Compatible (Must use HID reader and card)
B..
This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance.
Wall Mounted or Post Mounted (add posts below!)
Directional photocell with diagonal alignment
Angle of detection +- 4 degrees
Range: 100 ft
Obstacle Detection Time: 10ms
Housing Protection: IP 54
Required power supply: 24-35 VDC available on FAAC control..
FEATURES:
4 Channel capability/4buttons
Visor clip included
Dimensions: 2" x 2.5" x .5"
Transmitter XT4 works with the Receiver 433 RC Plug In Style..
File Name
Size
Link
FAAC S450 Spec Brochure
0.66Mb
download
FAAC S450H Install Manual
1.50Mb
download
FAAC S450H Cutsheet
0.51Mb
download
FAAC S450H manual
9.72Mb
download
FAAC E024U Control Board Manual
3.02Mb
download