SEA Verg  24VDC115VAC Electromechanical Barrier Gate Operator Solar Ready 1132SO-5MT-CSA

SEA Verg 24VDC115VAC Electromechanical Barrier Gate Operator Solar Ready 1132SO-5MT-CSA

Call for price

ACCESSORIES & RELATED MODELS

Doorking 1520 Standalone Card Reader (AWID Cards) 1520-080

Doorking 1520 Standalone Card Reader (AWID Cards) 1520-080

Click on the Related Products Tab to Order Required Memory Standalone Card Reader Surface Mount -programmable card reader system can store up to 1000 card codes. Includes 1000 memory, 16.5 volt, 20 VA plug-in transformer.AWID Reader See Memory upgrade Below The model 1520 provides users with a full feature single door stand-alone access control system. The 1520 is available with a built-in proximity card reader or can be ordered as a single door controller allowing the user to add their..

SEA Verg Kit round beam withRapid Release (round beam 10 feet ( 12710795

SEA Verg Kit round beam withRapid Release (round beam 10 feet ( 12710795

Click on the "Related Tabs" above for more models SEA Verg Commercial Round Beam Kit 10 ft long and balancing spring SEA Verg for beams up to 16 feet, intensive use (75%) Automatic barrier 24V, with galvanized and polyester painted casing, resistant to any ambient temperature. It is supplied with slowdown in opening and closing, suitable for controlling commercial and public access car parks with not intensive use. The emergency batteries allow the functioning up to 100 cycles in ..

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

The Infrared Photoeye IRB-4x works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators. Features Works without lenses so it is easy to align Electronic sunlight filter Automatic compensation for temperature changes 24 degrees of alignment freedom Capable of penetrating 70% obstruction due to fog, steam and even spray Immune to vibration Does ..

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Single Channel, Dual Relay Outputs The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch Input Power, 11-Pin Amphenol Connector 3: 120 VAC 4: 12 VDC, 24 VDC or 24 VAC 8: 240 VAC -S: Fa..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Linear AK-11 Exterior Digital Keypad  ACP00748

Linear AK-11 Exterior Digital Keypad ACP00748

The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The rela..

Click on the "Related Tabs" above for more models
 

• Fast low voltage automatic barrier.
• Slow down speed adjustable in opening and
closing
• Electric motor with low consumption
• Reverse on obstacles with adjustable
sensitivity
• Battery back-up to guarantee the operating also
in case of power failure
• Optional solar panel KIT SUNNY
• Control board USER 1 - 24V DG.
• Adjustable mechanical stops
• Cataphoresis treated and polyester painted
steel box for longer life
I NOX stainless steel box available( on request)
• Oval beam with protection rubber
and optional STRI P LED light
• The electronic control board
(USER 1 - 24V DG)is positioned on the top
and in a horizontal position to allow an
easier use during installation or
maintenance
• Universal right / left hand side.


 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Doorking 1520 Standalone Card Reader (AWID Cards) 1520-080

Doorking 1520 Standalone Card Reader (AWID Cards) 1520-080

Click on the Related Products Tab to Order Required Memory Standalone Card Reader Surface Mount -programmable card reader system can store up to 1000 card codes. Includes 1000 memory, 16.5 volt, 20 VA plug-in transformer.AWID Reader See Memory upgrade Below The model 1520 provides users with a full feature single door stand-alone access control system. The 1520 is available with a built-in proximity card reader or can be ordered as a single door controller allowing the user to add their..

SEA Verg Kit round beam withRapid Release (round beam 10 feet ( 12710795

SEA Verg Kit round beam withRapid Release (round beam 10 feet ( 12710795

Click on the "Related Tabs" above for more models SEA Verg Commercial Round Beam Kit 10 ft long and balancing spring SEA Verg for beams up to 16 feet, intensive use (75%) Automatic barrier 24V, with galvanized and polyester painted casing, resistant to any ambient temperature. It is supplied with slowdown in opening and closing, suitable for controlling commercial and public access car parks with not intensive use. The emergency batteries allow the functioning up to 100 cycles in ..

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

The Infrared Photoeye IRB-4x works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators. Features Works without lenses so it is easy to align Electronic sunlight filter Automatic compensation for temperature changes 24 degrees of alignment freedom Capable of penetrating 70% obstruction due to fog, steam and even spray Immune to vibration Does ..

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Single Channel, Dual Relay Outputs The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch Input Power, 11-Pin Amphenol Connector 3: 120 VAC 4: 12 VDC, 24 VDC or 24 VAC 8: 240 VAC -S: Fa..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Linear AK-11 Exterior Digital Keypad  ACP00748

Linear AK-11 Exterior Digital Keypad ACP00748

The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The rela..

File Name Size Link
SEA Operators and Product Guide 1.74Mb download
SEA Verg Spec Brochure 0.68Mb download
SEA Verg Manual 1.42Mb download