StrongArm M50 is a high cycle, M50-P2 crash tested, fortified barrier arm. This operator runs with the ultra-reliability of HySecurity�s 30 year proven hydraulics, the flexibility, power, and reliability of HySecurity�s programmable Smart Touch� Controller, and unique functional and safety benefits. Installation is easy and inexpensive with integrated hydraulics and controls. StrongArm M50 is available to fit 12 to 24 foot clear openings, is rated continuous duty* and runs at 6 to 8 seconds open/close depending on arm length. EFO is 5 to 7 seconds.
* 100 cycles per hour
Model
StrongArm M30
StrongArm M50
Crash Certified
M30, P1-ASTM F2656-07
M50, P2-ASTM F2656-07
Shallow Mount
6' x 6' x 2' (1.83 m x 1.83 m x .6 m)
n/a
Deep Mount
4' x 4' x 4' (1.22 m x 1.22 m x 1.22 m)
6' x 6' x 4' (183 x 183 x 122 cm)
Duty Cycle
Continuous duty*
Continuous duty*
Horsepower
2 hp
2 hp
Open/Close Time
6 seconds to 8 seconds
depending on arm length
6 seconds to 8 seconds
depending on arm length
Emergency Fast
Close Time (EFO)
5 seconds to 7 seconds
depending on arm length
5 seconds to 7 seconds
depending on arm length
Clear Opening
12 ft to 24 ft in 2 ft increments
(366 cm to 732 cm in 61 cm increments)
12 ft to 24 ft in 2 ft increments
(366 cm to 732 cm in 61 cm increments)
Ingress Protection
IP56
IP56
Temp. Rating
-40º F to +158º F (-40º C to +70º C)
using Uniflow fluid
-10° F to 158° F (-23° C to 70° C)
using biodegradeable fluid
-40º F to +158º F (-40º C to +70º C)
using Uniflow fluid
-10° F to 158° F (-23° C to 70° C)
using biodegradeable fluid