LiftMaster MEGA ARM TOWER  24VDC Parking Gate Barrier Operator

LiftMaster MEGA ARM TOWER 24VDC Parking Gate Barrier Operator

Call for price

ACCESSORIES & RELATED MODELS

Doorking 1520 Standalone Card Reader (AWID Cards) 1520-080

Doorking 1520 Standalone Card Reader (AWID Cards) 1520-080

Click on the Related Products Tab to Order Required Memory Standalone Card Reader Surface Mount -programmable card reader system can store up to 1000 card codes. Includes 1000 memory, 16.5 volt, 20 VA plug-in transformer.AWID Reader See Memory upgrade Below The model 1520 provides users with a full feature single door stand-alone access control system. The 1520 is available with a built-in proximity card reader or can be ordered as a single door controller allowing the user to add their..

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

The Infrared Photoeye IRB-4x works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators. Features Works without lenses so it is easy to align Electronic sunlight filter Automatic compensation for temperature changes 24 degrees of alignment freedom Capable of penetrating 70% obstruction due to fog, steam and even spray Immune to vibration Does ..

Linear AK-11 Exterior Digital Keypad  ACP00748

Linear AK-11 Exterior Digital Keypad ACP00748

The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The rela..

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Single Channel, Dual Relay Outputs The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch Input Power, 11-Pin Amphenol Connector 3: 120 VAC 4: 12 VDC, 24 VDC or 24 VAC 8: 240 VAC -S: Fa..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

Liftmaster Mega Arm Tower Gate Opener Including Two 12V/7AMP Batteries (MA004)

*Boom not included, sold separately.

The Mega Arm and Mega Arm Tower are DC-powered additions to the LiftMaster® family of gate operators. Designed with a 24V DC (1/2 HP equivalent) motor, these models provide exceptional starting torque and continuous operation, making them ideal for most applications. Constructed with an aluminum alloy chassis, they're corrosion resistant and light enough for one person to carry and install. The heavy-duty motor supports 6,000 cycles per day with an operator speed of 2.5 seconds to open or close.


Its full service controller is capable of accepting inputs from telephone entry, loop detectors, card readers, push buttons, barcode scanners, and is equipped with multiple vehicle memory buffer. Built in regulated 24VDC backed up power provided for accessories (detectors, receivers, card readers).

The standard break away arm design can allow the arm to be reused many times. Finally, its modern design and cutting edge technology will make the MEGA ARM the perfect choice for all your parking control applications.

STANDARD FEATURES:
  • Radio Receiver Built-in
  • Aluminum Alloy Chassis
  • Two 12V/7AMP Batteries (MA004)
  • Soft Start/Stop
  • DC Operator System
  • Right or Left-Handed Operation
  • Breakaway Arm
  • Control Inputs
  • Inherent Obstruction Sensing
  • LED Indicators
  • Dual Gate Operation
  • Dynamic Braking
  • Magnetic Sensors
  • Timer to Close

 

There are no reviews for this product.

Write a review

Note: HTML is not translated!
Bad           Good
Doorking 1520 Standalone Card Reader (AWID Cards) 1520-080

Doorking 1520 Standalone Card Reader (AWID Cards) 1520-080

Click on the Related Products Tab to Order Required Memory Standalone Card Reader Surface Mount -programmable card reader system can store up to 1000 card codes. Includes 1000 memory, 16.5 volt, 20 VA plug-in transformer.AWID Reader See Memory upgrade Below The model 1520 provides users with a full feature single door stand-alone access control system. The 1520 is available with a built-in proximity card reader or can be ordered as a single door controller allowing the user to add their..

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

EMX IRB-4X Infrared Photoeye - Includes Nema 4X Enclosures

The Infrared Photoeye IRB-4x works without lenses so it is easy to align, making it less sensitive to fog, dust, snow, and sunlight. Used as a safety, reversing, or opening device in conjunction with automatic operators. Features Works without lenses so it is easy to align Electronic sunlight filter Automatic compensation for temperature changes 24 degrees of alignment freedom Capable of penetrating 70% obstruction due to fog, steam and even spray Immune to vibration Does ..

Linear AK-11 Exterior Digital Keypad  ACP00748

Linear AK-11 Exterior Digital Keypad ACP00748

The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics. Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The rela..

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Reno B Vehicle Loop Detector with 11-Pin Amphenol Connector Single Channel, Dual Relay Outputs, Internal DIP

Single Channel, Dual Relay Outputs The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch Input Power, 11-Pin Amphenol Connector 3: 120 VAC 4: 12 VDC, 24 VDC or 24 VAC 8: 240 VAC -S: Fa..

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Reno PLB-24-50-RA Preformed Loop (4' X 8' X 50 ft lead-in from corner)

Application: 1/4" wide saw cuts, gated facilities The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..

File Name Size Link
LIftmaster Mega Arm Install Manual 1.46Mb download
LIftmaster Mega Arm Sprint Spec Brochure 0.64Mb download