SEA Lepus Rack and Pinion Operator Heavy Duty:
Lepus Rack for gates max weight 1500 Pounds and 37ft long.
Compact, Powerful and Silent The Lepus Heavy Duty is a motor-reducer for sliding gates with a mechanical bi-disk clutch for a sensitive regulation of the motor torque. The perfect keeping of the system in closing is granted by the irreversibility of the gear wheel tangent screw. The electric motor, the clutch and the reduction gears are housed in a single-piece cast aluminum block and constantly immersed in an oil bath. The oil acts as both the lubricant for the gears as a cooling agent to dissipate the heat generated by the electric motor operation. Inductive Limit Switch The motor-reducer is equipped with an inductive limit switch. This type of switch eliminates the use of moving parts and associated problems that can occur. Manual Release In case of power failure, the unit can be mechanically released using a special key and the gate or door operated manually until power is restored.
• Complete lubrication of motor and all
mechanical components for longer life and
intensive use
• Manual release protected through a lid with key
for safety
• Gears housed in a single piece cast aluminum
block
• Encoder (detection sensor) for reverse on obstacle
• High quality mechanical, twin-disc clutch in oil
bath for torque adjustment
• Easy manual release with key
• Foundation plate adjustable in height and width
• Duty Cycles*: 60 per hour.
* Duty Cycles depend on gate size an installation