Single Channel, Dual Relay Outputs
The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch
Input Power, 11-Pin Amphenol Connector
3: 120 VAC
4: 12 VDC, 24 VDC or 24 VAC
8: 240 VAC
-S: Fail Secure Version
Pulse Output
SP1: 0.125 Infinite
SP2: 1 Second
SP3: 77 Millisecond
Relay B (Internal Dip Switches)
Blank: Pulse-on-Entry
DP: Presence Mode
On Failure
Blank: Fail-Safe
S: Fail-Secure
Application: Shelf Mount, One Channel, Two Relay Outputs
The Model B is a full featured, single channel, dual output vehicle detector that incorporates the reliable vehicle detection technology found in all of Reno A & E’s vehicle detectors. All detector functions and settings are configured by using a set of eight internal DIP switches and a front panel mounted pushbutton switch.
Input Power, 10-Pin MS Style Connector
1: 120 VAC
5: 12 VDC, 24 VDC or 24 VAC
..
Application: 1/4" wide saw cuts, gated facilities
The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
11-pin Amphenol Wiring Harness
For use with the Model AX, AX2, AX2DL, B, BX, BXC, or BX-LP series vehicle detectors.
..
File Name
Size
Link
Reno B Cutsheet
0.07Mb
download
Reno B Instructions
0.11Mb
download
Ramset Jet Operator Install Manual
1.92Mb
download
Magnetic MPS Motorized Swing Gates
2.03Mb
download