Click "Related" tab for more FAAC products
FAAC 640 Hydraulic Barrier Gate Opener The 640 range is the natural choice for heavy traffic management and larger commercial applications.
This system can be customised to enhance site suitability with a range of options including a pivoting foot, automatic release solenoid valve, and forked support and skirt. It is recommended that a beam fork support or end support is installed for beams of 5m and above. The 640 series has a neat slimline appearance yet is robust and hardwearing for commercial applications. The range also provides the reassurance of anti-crush hydraulics, a secure locking system for both open and closed positions and manual release with customised key. Whilst Microprocessor control and Surface Mount technology are the standard, the 624 BLD is a fully programmable control board. There are 3 programming buttons with a 2-digit display on the control board, which allow the setting of parameters to achieve the required logics for operation. A master/slave configuration is programmed through the controls rather than adding any additional device.
FEATURES:
designed for heavy traffic situations
wide entrances that require long beams (up to 23 ft)
100% duty cycle
115 or 230 VAC Operator
Continuous duty application
Adjustable hydraulic pressures
4 different operating logics
Pre-assembled counterbalance system
Automated fan cooling on all models
Selectable warning light logic
Quiet operation
Design for all Quantum products direct face-plate mounting and all AeGIS products with adapter plate Universal head face-plate: slot openings for mounting various manufacturers products Heavy duty 2-1/2" 11 gauge cold rolled steel tubing Heavy duty 10 gauge face-base plates and base cover Triple coat rust proof UV inhibitors enamel finish Stainless steel bolts and nuts included
..
For use with rectangular aluminum beams on the
model 640. (Included when order a barrier with an
arm)
&nb..
FAAC 640 Aluminum Beam when ordered with an operator comes with the appropriate fixing bracket. Beams ordered separately will be assumed to be replacement beams only and will not include fixing bracket. All aluminum beams measure 2in. x 4 in. X length of beam ordered. – length of the 640 operator must be 13 ft. thru 23 ft. only.
MODEL 640 BARRIER OPERATOR BOOMS AVAILABLE:
428061 Alum. Beam Rect 13' 640
428062 Alum. Beam Rect. 16'3" ..
FAAC Warning Lamp
PART NUMBER 410013 (230 VAC))
Connects to FAAC 230 VAC control panels;
..Amber light flashes while gate opens and closes
Dimensions: 4 in. x 4.5 in. (5.5 in. including base) x 5 in.
(10 cm x 11.5 cm [14.2 cm] x 13 cm)..
Monolec Hydraulic Fluid. This oil is the only recommended replacement fluid for all hydraulic gate operators...
This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance.
Wall Mounted or Post Mounted (add posts below!)
Directional photocell with diagonal alignment
Angle of detection +- 4 degrees
Range: 100 ft
Obstacle Detection Time: 10ms
Housing Protection: IP 54
Required power supply: 24-35 VDC available on FAAC control..
This is FAAC Loop Detector DSP 7. Hard wires into control panel backplate. Strictly for 620,615,640 FAAC Barrier Operators. This loop detector can handle all parking, drive-thru and access control applications. Can be used as a safety loop or as a free exit loop detector.
10-30 VAC/VDC
FEATURES:
Enclosure: Impact resistant, high temperature plastic
1.75" x 2.375" x 3.61"
Loop Size: Works with any in-ground inductive loop 20 - 1000nH
Frequency: Automatically tunes t..
Application: 1/4" wide saw cuts, gated facilities
The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
FAAC 1RP418DS Receiver for FAAC control panels. Use with 1TM418DS and 787317 transmitters.
..
FAAC 1TM 418DS Transmitter Single channel transmitter – 418 Mhz
Single channel transmitter – 418 Mhz Choice of over 1000 codes.12V battery included
..
Internet IP programmable via any browser on the market including iPad, Smartphone and Tablet
Programmable via Local Area Network (LAN), INTERNET or Direct Ethernet Connection via any browser
SELECTABLE PORT, NO DEDICATED STATIC IP NEEDED
“NO SOFTWARE INSTALLATION” on a computer is necessary
100 Tenants Capacity
1x16 Liquid Crystal Display (LCD)
Built-in 26 Bit Proprietary Wiegand Reader
26-Bit Wiegand Input, HID Reader Compatible (Must use HID reader and card)
B..
The Model AK-11 Exterior Digital Keypad is a digital keyless entry system designed for access control applications. The keypad is housed in a rugged cast aluminum enclosure that can be mounted to a pedestal or bolted directly to a wall. The die-cast keys have bright, easy-to-read yellow graphics.
Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp capacity. The rela..
File Name
Size
Link
FAAC 640 Spec Brochure
1.16Mb
download
FAAC 640 and 620 Install Manual
1.21Mb
download
FAAC Barrier Cutsheet
0.29Mb
download
FAAC 620/ 640 Manual
1.26Mb
download