Click "Related" tab for more FAAC products
FAAC 620 Hydraulic Barrier Gate Opener
Speed and Versatility The 620 hydraulic barrier range is fast and reliable with a capability to support up to a 5m(13') beam. The 620 Standard with a duty cycle of 70% will support a 5m beam and bottom skirt with an opening/closing speed of 4 seconds. The 620 Rapid offers a beam length of up to 4m with an opening / closing speed of 2 seconds. The 620 Super Rapid will support a 3m beam and operate in 0.8 seconds. Long Term Reliability The 620 range is equipped with electronic slowdown at the end of the opening and closing cycle providing protection to the barrier mechanism. The 620 range is also available in stainless steel to offer higher corrosion protection for the most demanding environment. Use of cutting edge materials and treatments such as cataphoresis and niploy plus tried and tested FAAC hydraulic technology all combine to ensure long life.
FEATURES:
Continuous duty operation
Adjustable hydraulic pressures
4 different operating logics
Pre-assembled counterbalancing system
Automated fan cooling
Pause time selections
Selectable warning light with logic
Quiet operation
Fast opening time (2 sec for 8.5 ft. beam)
Application: 1/4" wide saw cuts, gated facilities
The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
This is FAAC Loop Detector DSP 7. Hard wires into control panel backplate. Strictly for 620,615,640 FAAC Barrier Operators. This loop detector can handle all parking, drive-thru and access control applications. Can be used as a safety loop or as a free exit loop detector.
10-30 VAC/VDC
FEATURES:
Enclosure: Impact resistant, high temperature plastic
1.75" x 2.375" x 3.61"
Loop Size: Works with any in-ground inductive loop 20 - 1000nH
Frequency: Automatically tunes t..
FAAC 1RP418DS Receiver for FAAC control panels. Use with 1TM418DS and 787317 transmitters.
..
FAAC 1TM 418DS Transmitter Single channel transmitter – 418 Mhz
Single channel transmitter – 418 Mhz Choice of over 1000 codes.12V battery included
..
For use with rectangular aluminum beams on the
model 620 and 615 Barrier Gate Operator. (Included when order a barrier with arm)
..
This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance.
Wall Mounted or Post Mounted (add posts below!)
Directional photocell with diagonal alignment
Angle of detection +- 4 degrees
Range: 100 ft
Obstacle Detection Time: 10ms
Housing Protection: IP 54
Required power supply: 24-35 VDC available on FAAC control..
FAAC 620 Aluminum Beam when ordered with an operator comes with the appropriate fixing bracket. Beams ordered separately will be assumed to be
replacement beams only and will not include fixing bracket. All aluminum beams measure 2in. x 4 in. X length of beam ordered. – length of the 620 operator arm must be 6 ft.thru 13 ft. only.
MODEL 620 BARRIER OPERATOR BOOMS AVAILABLE:
428088 Alum. Beam Rect 8'1" 615/620
428078 Alum. Beam Round 8'
428089 Alum...
FAAC 620 Aluminum Beam when ordered with an operator comes with the appropriate fixing bracket. Beams ordered separately will be assumed to be
replacement beams only and will not include fixing bracket. All aluminum beams measure 2in. x 4 in. X length of beam ordered. – length of the 620 operator arm must be 6 ft.thru 13 ft. only.
MODEL 620 BARRIER OPERATOR BOOMS AVAILABLE:
428088 Alum. Beam Rect 8'1" 615/620
428078 Alum. Beam Round 8'
428089 Alum...
File Name
Size
Link
FAAC 640 and 620 Install Manual
1.21Mb
download
FAAC Barrier Cutsheet
0.29Mb
download
FAAC 620/ 640 Manual
1.26Mb
download