Click "Related" tab for more FAAC products
FAAC 620 Hydraulic Barrier Gate Opener
Speed and Versatility The 620 hydraulic barrier range is fast and reliable with a capability to support up to a 5m(13') beam. The 620 Standard with a duty cycle of 70% will support a 5m beam and bottom skirt with an opening/closing speed of 4 seconds. The 620 Rapid offers a beam length of up to 4m with an opening / closing speed of 2 seconds. The 620 Super Rapid will support a 3m beam and operate in 0.8 seconds. Long Term Reliability The 620 range is equipped with electronic slowdown at the end of the opening and closing cycle providing protection to the barrier mechanism. The 620 range is also available in stainless steel to offer higher corrosion protection for the most demanding environment. Use of cutting edge materials and treatments such as cataphoresis and niploy plus tried and tested FAAC hydraulic technology all combine to ensure long life.
FEATURES:
Continuous duty operation
Adjustable hydraulic pressures
4 different operating logics
Pre-assembled counterbalancing system
Automated fan cooling
Pause time selections
Selectable warning light with logic
Quiet operation
Fast opening time (2 sec for 8.5 ft. beam)
Monolec Hydraulic Fluid. This oil is the only recommended replacement fluid for all hydraulic gate operators...
Replacement Board for 620 and 640 Automatic Barrier Operator..
This is FAAC Loop Detector DSP 7. Hard wires into control panel backplate. Strictly for 620,615,640 FAAC Barrier Operators. This loop detector can handle all parking, drive-thru and access control applications. Can be used as a safety loop or as a free exit loop detector.
10-30 VAC/VDC
FEATURES:
Enclosure: Impact resistant, high temperature plastic
1.75" x 2.375" x 3.61"
Loop Size: Works with any in-ground inductive loop 20 - 1000nH
Frequency: Automatically tunes t..
Application: 1/4" wide saw cuts, gated facilities
The Model PLB Preformed Loop is a prefabricated loop/lead-in assembly designed to be installed in 1/4“ wide saw cuts. The design allows for variations in the perimeter of the loop slot. There is no need for 45 degree corner cuts. The PLB loop cable, lead-in cable, and splice enclosure are designed for maximum reliability and long life. Wire insulation and cable jackets are Cross-linked Polyethylene (XLPE). XLPE insulation provides e..
FAAC 1TM 418DS Transmitter Single channel transmitter – 418 Mhz
Single channel transmitter – 418 Mhz Choice of over 1000 codes.12V battery included
..
FAAC 1RP418DS Receiver for FAAC control panels. Use with 1TM418DS and 787317 transmitters.
..
This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance.
Wall Mounted or Post Mounted (add posts below!)
Directional photocell with diagonal alignment
Angle of detection +- 4 degrees
Range: 100 ft
Obstacle Detection Time: 10ms
Housing Protection: IP 54
Required power supply: 24-35 VDC available on FAAC control..
The Model AK-21W Exterior Digital Keypad is a digital keyless entry system designed for outdoor access control applications. The keypad is housed in a rugged, die-cast metal enclosure and is designed to be mounted in a standard single-gang electrical box. The die-cast keys have bright, easy-to-read yellow graphics.
Up to 480 entry codes, from 1 to 6 digits in length, can be programmed. They can activate either, or both, of the relay outputs. Relay #1 has a 5 Amp capacity. Relay #2 has a 1 Amp..
File Name
Size
Link
FAAC 640 and 620 Install Manual
1.21Mb
download
FAAC Barrier Cutsheet
0.29Mb
download
FAAC 620/ 640 Manual
1.26Mb
download