This is the FAAC 455D Control Board only. No enclosure is included. To be used as a replacement control panel for your FAAC gate system. Choose between 115V and 230V.
Compatible With:
FAAC 400
FAAC 402
FAAC 422
FAAC 750
FAAC 760
FAAC 615
This is the FAAC Photobeam photoelectric safety sensor model number 785163. Range is 100 feet. Directional, with diagonal alignment. A safety sensor is recommended in all gate applications but is REQUIRED for UL-325 compliance.
Wall Mounted or Post Mounted (add posts below!)
Directional photocell with diagonal alignment
Angle of detection +- 4 degrees
Range: 100 ft
Obstacle Detection Time: 10ms
Housing Protection: IP 54
Required power supply: 24-35 VDC available on FAAC control..
433 RC Plug in style Single Channel receiver works with the XT4 Transmitter..
FEATURES:
4 Channel capability/4buttons
Visor clip included
Dimensions: 2" x 2.5" x .5"
Transmitter XT4 works with the Receiver 433 RC Plug In Style..
Two-Button Switch
Features:
.Switch rating: 250 VAC; 10 amps
.Indoor or outdoor use
.Painted aluminum
.Surface mounted
.Open buatton is N.O. (Normally Opened)
.Close button is N.O. (Normally Opened)
For use with B, C, and P FAAC control panel logics:
B = 3 momentary switches: open, close and stop
C = 2 continuous pressure switches: open and close;
P = 3 momentary switches: open, close.
Dimensions: 4 in. wide x 2.87 in. high x 2.25 in. deep
(10.2 cm x 7.3 cm..
The E024U control board can be used with all 24V electro-mechanical and hydraulic swing gate operators. It features easy programming with trimmers and dip switches, powerful switching power supply, one pushbutton automatic self-learning and built-in battery back-up. It operates 6 different operators of the 24V line (S800H, S450H, S418, 770, 415 and 390).
The New E024U Control Board is designed to be
used with the following FAAC Swing Gate
Operators:
S418 Electro-mechanical Operator
S450H ..
File Name
Size
Link
Faac 455D MANUAL
0.25Mb
download